ACM1-X User Guide
Revision 1
2022 Audyssey Laboratories Inc
Page
3
of
3
Usage:
•
Download and install the MultEQ-X application from the Microsoft store:
https://www.microsoft.com/store/productId/9P0SMVDTVHQJ
•
Refer to the
for instructions to Sign-in, purchase an AVR license and connect
to an AVR.
•
Connect the ACM1-X microphone to the AVR Mic Input connector on the AVR.
•
On the ‘Measure’ or ‘Adjust Sub Levels’ page select ‘Add New Mic’:
•
Enter the serial number of your ACM1-X microphone in the serial number box:
•
Click the ‘Download Mic File’ button. After a short time the status should show that the mic file was
downloaded successfully. If there is an error check that the serial number is entered correctly and your
connection to the internet.
•
Click the ‘Add Microphone’ Button. The downloaded microphone file will be available and selected in
the microphone selection drop-down, and is now ready to perform measurements.
