South of Market
Audio Dock Manual
13
You can make hands-free speakerphone calls on the Audio Dock
using your iPhone or other Bluetooth-equipped mobile phone.
First, make sure you’ve paired your mobile phone to the Audio
Dock with Bluetooth. If you haven’t done this, jump to the Pairing
your device with the Audio Dock using Bluetooth section of this
manual.
Note:
Bluetooth pairing is required to use the Audio Dock’s
speakerphone.
Outgoing calls
Now that your phone is paired to the Audio Dock, any outgoing
calls you make from your phone will default to the Audio Dock’s
speakerphone. The front/rear microphones will pick up your voice
(and other voices in the room), while the built-in loudspeakers will
reproduce the other end of the call.
You can always redirect your phone call from the Audio Dock’s
speakerphone to your mobile phone for privacy. You can also move
calls from your mobile phone to the Audio Dock.
Incoming calls
When your phone is paired to the Audio Dock, an incoming call will
ring through the Audio Dock’s amplified loudspeakers. In addition,
the Play/Pause sensor
[2]
will flash red and white periodically, giving
you a visual indication of an incoming call.
To answer the call, briefly press the Phone button
[29]
on the
remote. Or you can answer the call by touching and holding the
Play/Pause
[2]
sensor. (You can also answer the incoming call
directly on your mobile phone.)
If you’d rather reject the incoming call, press and hold the
Phone button
[29]
on the remote for two seconds. (You can also
reject the call using your mobile phone directly.)
Note:
If your iPhone is docked and you’re sending music via the
Apple connector, an incoming call will automatically switch your
phone to Bluetooth mode (as long as you’ve already paired it to the
Audio Dock). This switching to Bluetooth mode is necessary for you
to use the Audio Dock’s speakerphone.
Telephone Calls using the
Audio Dock via Bluetooth
®
When you receive an incoming call, the
Audio Dock will play whatever ringtone
you’ve selected in your phone*—even if your
phone is set to vibrate or silent? The volume
level of the ring is a function of where you’ve
set the Audio Dock’s telephone volume
level—so if you’re sleeping and want it to
be silent, turn the telephony volume all the
way down or hit Mute. If the Audio Dock is
in standby mode, it won’t ring and the Play/
Pause sensor won’t flash (but the phone will
ring on its own).
*If your phone doesn’t support in-band ringing, you’ll hear
a default ringtone generated by the Bluetooth module.
Did You Know?
