-
installer
GIALIX 24 MA C -BC
manual
-
4
1 - PLEASE READ
IMMEDIATELY
1.1 - Safety
1.2 - Important information
Preservation of documents
This technical installation manual forms part of the
appliance which it refers to.
This manual must be safeguarded and passed on to
successive users for future reference.
It will be considered as evidence in case of litigation.
In order for the warranty to be valid, the instructions
must be read before operating the appliance.
Danger of death by electrocution
Touching live electrical wires can cause severe bodily
injury or death.
• Before undertaking any work on the
appliance, ensure to switch off the power
supply to the appliance.
• Ensure that there is no possibility of the
power supply becoming active again.
Qualification of the user
This appliance should not be used by anyone
(including children) with reduced physical, sensory
or mental capabilities, or by anyone who has
insufficient experience or knowledge of the
appliance; unless they are being supervised by
someone who is responsible for their safety and
in possession of the operating instructions of the
appliance.
Children should be supervised to ensure that they
do not play with the appliance.
Clean and flush the hydraulic heating circuit before
connecting the appliance.
Danger due to improper use
Any work carried out by an unqualified person may
result in damage to the installation or in bodily
injury.
• Do not perform any maintenance work on
this appliance unless you are a qualified
professional.
National rules and regulations
(directives, laws, and standards)
Once the appliance is installed and switched on, all
decrees, directives, technical rules, and standards
must be respected in their current version in effect
in the country of installation and use. In France, we
conform specifically to the
NFC 15.100
electrical
installation standard.
Humidity and water splashes
The appliance should be installed in an area where
it is not exposed to humidity and without any risk of
being splashed by water.
Applicable areas of use
This appliance is intended for use as an appliance for
the production of domestic hot water and heating
water in a closed and pressurised circuit.
The intended use of the appliance includes the
following points:
• following the instructions for operating,
installing, and maintaining this appliance and
all of its components.
• ensuring the compliance of the appliance to
all inspection and maintenance conditions
which are listed in this manual.
Always turn off the appliance before performing any
maintenance work on any electrical components.
Before connecting to the power supply, check that
the voltage on the electrical network is the same as
that on the rating plate of the appliance. Check that
the installation is equipped with a properly sized and
connected grounding cable.
Before undertaking any maintenance, handling,
or in the case of the appliance not functioning or
malfunctioning, always disconnect the electrical
supply to the appliance and consult a specialist.
All installation and maintenance work must be
carried out with the appliance switched off and
by a qualified professional.
The manufacturer cannot be held liable for any
damages caused by not respecting the instructions
supplied with the appliance, or by improper
handling, installation, or use.
This manual may be subject to change without prior
notice.
The appliance can only function when
filled with water. Never turn on the
appliance if the tank has not been properly filled
with water and completely purged of air.
Not respecting this clause renders the warranty
null and void.
RENDERING THE WARRANTY NULL AND VOID
