243
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Functions
Group Function (System Telephone)
Function Key for the Group Function
Press the key to execute the action configured in the key for the specified
group.
In addition, when functions are assigned on the first key level, the status of
the function is indicated by the corresponding LED.
Requirements for using the function:
•
Telephone is system telephone on the PBX
• Controlling of the PBX via telephone
permission assigned in the PBX
Proceed as follows by assigning the function key:
•
Using the Configuration Manager by selecting
Group
•
Using the telephone by selecting
Group
Notes:
For further information about the general procedures when assigning
function keys, see
Additional settings for this function key are described in the following.
LED signalling on the key:
green
The telephone is logged in to the group for incoming and
outgoing calls.
yellow
The phone is logged in to the group as incoming or outgoing
according to the
Call direction
key assignment.
off
The telephone is logged out of the group according to the
Call
direction
key assignment.
