COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
258
Functions
InterCom Announcement/Hands-free calling
Note:
InterCom hands-free calls can also be performed by any internal
telephone (see the PBX manual).
Depending on the action type configured on the key, proceed as follows:
1. Press the
function key
for InterCom hands-free calling or press and
hold the
function key
.
The LED next to the function key lights up in green to show that a call
connection is present.
2. To end the announcement or hands-free calling function, press the
function key
again or release the
function key
.
Function Key for InterCom Hands-Free Calling
Press the key when the telephone is in its idle state to select the phone
number stored on the key and initiate the InterCom hands-free call.
Depending on the action type configured, you need to hold the key during
hands-free operation (as soon as you release the key again, the connection
is terminated) or switch the key over by briefly pressing the key (the key is
pressed once at the start and once at the end).
In addition, when InterCom destination is defined on the first key level, the
status of the InterCom destination connection is indicated by the corres-
ponding LED.
