COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
320
Functions
Waiting Field Function (System Telephone)
Notes:
If you press the key to place a caller in the waiting field, the LED next to
the key lights up yellow. If a caller is placed in the waiting field either
automatically or by another waiting field reception, the LED then lights
up red.The function can only be set up on a programmable function key
that has an LED (not on a touch function key).
The
Shared Line
function fills both key levels. If one level is filled, the
other levels are also filled automatically.
Requirements for using the function:
•
Telephone is system telephone on the PBX
•
The telephone has been selected in the PBX as a waiting field reception
yellow
(blinks
twice)
The call is held locally in the telephone and the caller's
business card is connected to the toolbar.
Press the key once to pick up the call.
yellow
(blinks
quickly)
The telephone dials the phone number after you press the
function key.
off
No call is pending. Press the key to initiate a call through the
assigned account.
Timeout: The function key is blocked for approximately 2 to 3
seconds after a call over a
Shared Line
has been completed.
LED signalling on the key:
