327
COMfortel 1400 IP/2600 IP/3600 IP - Firmware V2.6 - Operation/Configuration - V05 09/2016
Functions
Speed Dialling
Note:
You cannot run this function if the account stored for a function key
has been deleted. When you press the key, a dialogue opens, in which
you can assign a new account to the key. Tap on
New account
next to
yellow
(blinking)
Only when there is an internal VoIP subscriber and display of
the registration status is switched on: The telephone is not
registered on the PBX.
off
The internal telephone is available. Press the key to place a
call.
LED signalling on the key (when defined with an internal group
number):
red
Calls are in progress on all logged-in telephones or no
telephone in the group is logged in.
red
(blinking)
A logged in telephone is currently being called or a call is
waiting on that telephone. Press the key to initiate a pick-up.
yellow
The group is not available (call forwarding is configured for
the group).
off
The group is available. Press the key to place a call.
LED signalling on the key (when defined with an external number):
green
(blinking)
A call was made from the external subscriber's telephone and
the call was not accepted (assuming the external number is
transferred).
red
The external subscriber is currently calling or a call is in
progress.
LED signalling on the key (when assigned to an internal subscriber
number):
