COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
1047
Settings – Administration
Logging
- Address books of the PBX
Before any recording, all participants in the telecommunication
connection must be informed that these contents will be recorded and
must also be informed who will use the recorded data.
If you want to make the recorded data available to your specialised
dealer or to the manufacturer for error analysis, you must make sure that
the legal requirements are fulfilled.
Connection data can be recorded with the D-channel decoder PC
programme (D-channel output via IP) or on a syslog server. Enter
ok
in the
entry field, to accept the legal notes and then click
D-channel output via IP
.
Logging system
Connection data can be logged using the D-channel decoder PC
programme or on a syslog server configured for this purpose.
Important:
If
Logging enabled
is enabled and
D-channel
has been
selected, anyone within the network can record a D-channel protocol
over IP. A D-channel protocol also displays sensitive data, such as call
connection data. That is why you should only enable the
Logging
enabled
function if you need to create logs for error analysis purposes.
