COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
333
Short Reference
Room Monitoring
Room Monitoring
Enabling Room Monitoring (Only at a Single Internal Phone at the
Same Time)
## 8 * 61 #
Performing Room Monitoring (from an Internal Phone)
Destination number
Performing Room Monitoring (from an External Phone)
Remote switching number
## 8 PIN
* 60 #
Additional infor-
mationen
Subsequently place the receiver next to the phone.
To disable Room Monitoring, replace the receiver.
Destination
number
Internal number of the single phone (for exchange line
request type Direct exchange line phone: with
preceding **)
Remote switching
number
Remote switchin number for remote programming
PIN
External PIN
Additional infor-
mationen
You need an analogue DTMF phone, an ISDN phone
with DTMF dialling or an DTMF sender.
Wait for confirmation tone after entering the remote
switching number.
You will hear another confirmation tone after entering
the character string.
If you hear the busy signal, replace the receiver and
start again.
