COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
573
Settings – Subscriber (scr.)
Profiles
Preferred exchange line business Expert
Preferred exchange line private Expert
Defines via which exchange line outgoing external calls will be routed.
Automatic occupation
For outgoing external calls, any available connection is used, whereby first
the fixed network connections and then the VoIP connection and at last the
GSM connections were taken into account.
Special preferred exchange lines
For outgoing external calls, the connections released under
Expert
are
used depending on the selected priority. This makes the definition of a
preferred exchange line (priority = 1) with overflow to other connections
(priority > 1) possible. Exchange lines with priority
No automatic
occupation
are not used for outgoing calls.
Note:
If all released connections are busy, it is no longer possible to call. The
subscriber can only use a connection with the setting
No automatic
occupation
by entering a character string (see chapter Short Reference
> Targeted Exchange Line Access).
The same priority may be allocated to different external connections in
parallel.
