COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
665
Settings – Groups
Properties
1 in the order of calls, the second one the position 2, ... . If position 1 takes
a call, the second call will be assigned to position 2. The member of the
group with the position 1 will get the last position in the order for a future call
after he has finished the current call. If a call was not accepted, although all
logged-in members of the group were called, the call would be finished with
a busy signal.
Adding - fixed - rotating - Split Group
Here initially only one group members' phone is ringing. After the configured
delay time (
after:
) another single group member will be called. If the group
receives another call B initially the free group members will ring one after the
other (adding). If for the first call A less than half of the group members are
ringing more members are added to this call until exactly the half is reached.
If for the first call A more than half of the group members are ringing, no
members are added to this call (frozen). Only the remaining subscribers are
added to call B. If all group members are already ringing for call A, the group
is split for the calls. The order of calls depends on the configured
Priority
.
If finally all logged-in members of a group are called, the busy subscribers
will hear knocking additionally (only from external).
Adding - balancing - rotating - Split Group
Here initially only one group members' phone is ringing. After the configured
delay time (
after:
) another single group member will be called. If the group
receives another call B initially the free group members will ring one after the
other (adding). If for the first call A less than half of the group members are
ringing more members are added to this call until exactly the half is reached.
If for the first call A more than half of the group members are ringing, no
members are added to this call (frozen). Only the remaining subscribers are
added to call B. If all group members are already ringing for call A, the group
is split for the calls. The order of the calls depends on the configured
Priority
: First of all the member of the group first logged-in gets the position
1 in the order of calls, the second one the position 2, ... . If position 1 takes
a call, the second call will be assigned to position 2. The member of the
group with the position 1 will get the last position in the order for a future call
