COMmander 6000/R/RX - Firmware V7.0D - Advanced Information V19 04/2018
763
Settings – Devices
Alarms
•
Created device (e. g. a door terminal) whose part the switch input is
(e. g. a still free door bell button)
A switch input that can be used to trigger the alarm, is assigned to the alarm.
In the list field, select one of the existing switch inputs and click
.
If you do not want to use any of the existing switch inputs, select
New
switch input
in the list field (
cancels the operation). Enter a freely
selectable name for the switch input and select the device as whose part the
switch input is to be created in the
Add to
list field.
Enter a value under
DTMF sequence
(for analogue door terminals) or
SIP
invite
(for VoIP door terminals). To detect that the alarm has been triggered,
e. g. because a door bell button has been pressed, the PBX needs to know
which DTMF sequence or which SIP invite the connected device sends in
this case (see manual and settings of the device in question). The DTMF
sequence or the SIP invite usually is the phone number assigned to the door
bell button within the door terminal.
Click
Ok
.
Note:
The switch input remains part of this other device (e. g. door
terminal) in the configuration of the PBX, but takes over the selected
alarm function for the alarm.
Deletes the switch input or opens the configuration of the switch input.
