Make Calls with normal Telephones and change Settings
Forward Calls to a Group to stay reachable (Call Forwarding for Groups)
38
If an CF unconditional is activated in addition to another type, only the
CF unconditional works that means all calls are forwarded to the for-
warding target of the CF unconditional. The other types are overrid-
den in this case, but they remain activated. As soon as the CF uncon-
ditional is switched off, the other, still activated types will work again.
Important: For the configuration of call forwardings for groups the
telephone used has to be a member of the group to be forwarded and
has to have the authorization CF/Follow me for groups.
If you like to forward only external group calls to other internal tele-
phones or external connections, you can correspondingly restrict the
call forwarding via Web interface in the configuration manager COM-
set (see
chapter View and modify the Properties of your own Group
To activate group CF for calls to a superordinate group, you can con-
figure the CF via the Web interface in the configuration manager
COMset (see
chapter View and modify the Properties of your own
).
To activate group CF for calls already forwarded to your group (CF
cascading), you can configure the CF via the Web interface in the
configuration manager COMset (see
Properties of your own Group on page 64
Note: Do not mix up the call forwarding for groups and the call for-
warding for external numbers (see
). You can only forward exter-
nal calls to your mobile phone or another external connection with a
call forwarding for external numbers. A forwarding of internal calls or
to internal calls is not possible.
Note: If the telephone is “logged in“ the group to be forwarded, you
can simplify the configuration of the call forwarding. If you configure
a call forwarding for this group on the corresponding telephone, you
can enter the programming digit sequence without the telephone
number to be forwarded, that means “##97#...“.
Forward Group “unconditional“ to an internal/external Telephone because all Group Members are absent
b ##97n #
*21*
n
#
internal telephone
number to be forwarded*
*
Internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number. The entry of the telephone
number can be left empty if the subscriber is logged in outgoing in the group.)
Configure with internal target
internal telephone number**
**
Internal telephone number of the individual telephone (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or
*21*
r
#
Configure with external target
external telephone number***
*** Exchange line access number 0 + external telephone number (If you use a direct exchange line telephone for the entry, the exchange line access number 0 is left out.)
or short-code dialling number (If you use a direct exchange line telephone for the entry,
**
is preceding the short-code dialling number.)
or
*21#
activate
or
#21#
activate
