Make Calls with normal Telephones and change Settings
Forward Calls to stay reachable (Call Forwarding for Subscribers)
35
On some ISDN telephones and on the system telephone
COMfort 1000/1200/2000 plus or COMfortel 1100/1500/
2500/2500 AB/VoIP 2500 AB you can switch on/off the call forward-
ing for subscribers also via an existing function key or menu (see
manual of the telephone; it is also called “call diversion“).
If you use an analog telephone as an internal subscriber
telephone where the call forwarding is to be switched on/off
via T-Net function key/menu, you will also be able to use this comfort-
able operation (see manual of the telephone).
On some ISDN telephones and on the system telephone
COMfort 1000/1200/2000 plus or COMfortel 1100/1500/
2500/2500 AB/VoIP 2500 AB you can switch on/off the call forward-
ing for subscribers also via an existing function key or menu (see
manual of the telephone; it is also called “call diversion“).
If you use an analog telephone as an internal subscriber
telephone where the call forwarding is to be switched on/off
via T-Net function key/menu, you will also be able to use this comfort-
able operation (see manual of the telephone).
Forward Telephone “on Busy“ to an internal/external Telephone because you are currently telephoning
b
*67*
n
#
corresponding telephone
configure with internal target
internal telephone number*
*
Internal telephone number of the individual telephone (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or
*67*
r
#
configure with external target
external telephone number **
**
Exchange line access number 0 + external telephone number (If you use a direct exchange line telephone for the entry, the exchange line access number 0 is left out.)
or short-code dialling number (If you use a direct exchange line telephone for the entry,
**
is preceding the short-code dialling number.)
or
*67#
activate
or
#67#
deactivate
I
T
Forward Telephone “on no Reply“ to an internal/external Telephone in Case of a short Absence
b
*61*
n
#
corresponding telephone
configure with internal target
internal telephone number*
*
Internal telephone number of the individual telephone (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or internal telephone number of the group (If you use a direct exchange line telephone for the entry,
**
is preceding the telephone number.)
or
*61*
r
#
configure with external target
external telephone number**
**
Exchange line access number 0 + external telephone number (If you use a direct exchange line telephone for the entry, the exchange line access number 0 is left out.)
or short-code dialling number (If you use a direct exchange line telephone for the entry,
**
is preceding the short-code dialling number.)
or
*61#
activate
or
#61#
deactivate
I
T
