58
Remote Programming
Remote Programming with manual Authorization by
the Customer
Open the configuration program COMset and select the interface ISDN
PC-controller (CAPI 2.0) in the menu under „options...interface“.
If you save an open file into the customer’s PBX click on the button
„Save“. If you like to read the data out of the PBX click on the button
„Open“. Select then „remote config.“.
Enter, if existing, the administrator password of the customer’s PBX and
click on „OK“.
(For remote access with COMtools and COMlist the entry of the user
password is mandatory.)
Here you enter the telephone numbers of the customer’s PBX. Do not
yet confirm the dialog.
Please establish now an external call to the customer. You explain your
intended operation to the customer. If the customer agrees with you,
you will ask him to pick up the receiver of another subscriber telephone
of his PBX, to dial
99
(in case of direct public exchange twice
*
first)
and to hang up as soon as he will have heard the acknowledgement
tone. Now confirm the dialog by clicking on „OK“.
The conversation between you and your customer may last during the
whole procedure if a free exchange line is available. (After clicking
„Save“, also this call will be interrupted.)
Remote Programming without manual Authorization
If you like to do remote programming without manual authorization by
the customer, you have to pre-configure the customer’s PBX.
Under „Passwords“ in the configuration program of the PBX the Dealer
MSN must be entered. If your ISDN PC-controller for the remote pro-
gramming is directly connected to the external NT, use the main tele-
phone number (with area code) of your ISDN connection.
The data accessed by the programs COMtools, COMlist and Soft-LCR
easy can be protected by the user password.
For the read-out of call data with COMlist the user password
is mandatory.
On the page „Remote programming“ select an otherwise unused tele-
phone number of the customer as a remote switching and program-
ming MSN. Besides this configure the remote switching response time
to 10 seconds or less.
Enter a administrator password to protect the configuration.
Exchange Line Access Number 0 for ISDN PC-controller on internal
S
0
port (if not configured as Direct Exchange Line Telephone)
☞
Summary of Contents for COMpact 2206 USB
Page 66: ...884250...
Page 67: ......
Page 68: ...884250 03 03 04 Save the Earth 100 recycled paper...
