432
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Functions
Online Name Search
Creating Group Filters for Service Providers
If several group filters have been created, the sequence of application of
these filters can be determined (priority).
A group filter will only be processed if the application of group filters with a
higher priority has not been successful.
Proceed as follows:
•
Using the configuration manager
Requirements:
•
Created service provider
1. Open the page
Functions > Online name search > Basic settings
.
2. Click
Configure
in the line of the service provider in question.
3. Click
New
.
4. Enter a name for identification purposes in the
Group filter
entry field (e. g. a search
command).
5. Click
Save
.
The group filter will be taken over into the list.
6. Click
Configure
in the line of the group filter in question.
7. Click
New
.
8. Enter a search command (regular expression) or the character string you want to
search for into the
Search property
entry field.
9. In the
Mode
list field, select one of the following options:
10. Select or clear the
Line Mode
check box.
Use Match
: The response of the server (HTML code) will be filtered according
to the search property and only the search result will be further processed.
Delete Match
: The response of the server (HTML code) will be filtered
according to the search property and the search result will be deleted. Only the
rest will be further processed.
Replace Match
: The response of the server (HTML code) will be filtered
according to the search property and the search result will be replaced by the
substitute text. The modified response will then be further processed
completely.
