640
COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
Settings
VoIP
VoIP Provider Settings
Format of own phone number
Format in which the VoIP provider requires the phone number that is to be transmitted.
Country code with leading zeroes
: Your own external phone number, that is to be trans-
ferred,is sent to the VoIP provider with the entire country code (e.g. 0044).
Country code with l sign
: Your own external phone number, that is to be transferred,
is sent to the VoIP provider with the entire country code in mobile telephony format (e.g. +44).
Country code without leading zeroes
: Your own external phone number, that is to be trans-
ferred, is sent to the VoIP provider with a shortened country code (without the international
prefix (digit, e.g. 44).
Without country code
: Your own external phone number, that is to be transferred, is sent to
the VoIP provider without the country code, but with the local area code (e.g. 05306).
Only MSN or main number and DDI number
: Your own external phone number, that is to be
transferred, is sent to the VoIP provider without prefixes (e.g. 920082 or 92008279).
Only DDI number (only possible for PTP connection)
: Your own external phone number,
that is to be transferred, is sent to the VoIP provider without prefixes or the PBX base number
(e.g. 8279).
Local area code without leading zero
: Your own external phone number, that is to be trans-
ferred, is sent to the VoIP provider with the local area code, but without a leading zero (e.g.
5306).
Notes:
The PBX checks whether any of the specified phone numbers are to be trans-
ferred, and if so which ones (
Subscriber (scr.) > Properties > Exchange
line settings
).
The transmitted phone number is automatically converted into the selected
format. If prefixes are necessary for converting your own phone number, the
prefixes set for the account are used (
Public switched tel. networks >
Voice over IP (VoIP) > Accounts > Configure
).
