COMpact 5000/R - Firmware V6.6A - Installation, Operation and Configuration V05 03/2016
785
Service and Maintenance
Provisioning for IP Telephones
Selecting a Provisioning File as Template
2. Select the
Header file
check box in the line of the header file in question.
3. Click
Authorisations
in the line of the header file in question.
4. Select the desired subscriber(s):
•
To grant access to all subscribers:
Click
(only those subscribers that are currently registered on the PBX are
granted access).
or:
Select the
Authorisation for all subscribers
check box (all current and future
subscribers on the PBX are granted access).
•
To grant access to all subscribers: Click
.or select the
Authorisation for all
subscribers
check box.
•
To grant access to all subscribers to a group: Select a group in the
Authorisation
for all subscribers to the group
list field.
Note:
The header file is a combination of several provisioning files. When
assigning the authorisations to the required subscribers, they must also get
the authorisations of all provisioning files which are part of the header file. For
this, it is recommendable to select the required files under
Subscriber (scr.)
> IP provisioning > File management > Authorisations
in the list field
Take over authorisations from
.
5. Click
Save
.
Selecting a Provisioning File as Template
Proceed as follows:
•
Using the configuration manager
1. Open the page
Subscriber (scr.) > IP provisioning > File management
.
2. In the line of the required provisioning file, select the
as template
check box.
3. Click
Save
.
