COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
1027
Appendix Matériel
Status Displays on the LEDs
Note:
If the
Power
LED remains constantly lit in red even after a restart,
an error has occured. Please contact your dealer or the manufacturer
directly.
Status LED:
Power LED:
PBX status (in the case of an error):
Flashes red (1/
1 s)
Lit in red
No valid boot partition was found.
System is paused.
Flashes orange
(1/1 s)
Lit in red
In both boot partitions no constant
kernel data were found. System is
paused.
Status LED:
Power LED:
PBX status (during powering down):
Lit in green
Flashes green
The delayed powering down has been
enabled and the PBX waits for the
termination of the last call.
Lit in green
Lit in red
The PBX is powered down completely.
LAN LED (COMpact 5200): Status of the Ethernet Interface:
Off
No Ethernet connection to a computer/
network exists.
Lit in orange
An Ethernet connection to a computer/
network exists (link).
Flashes orange
An Ethernet connection to a computer/
network exists (link) and packets are being
transmitted.
