COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
109
Functions, Uses, Concepts
Ringtones
Ringtones
The PBX supports different ringtones for signalling calls on the internal
subscribers. They can be used for example to differentiate internal calls,
external calls via different external numbers, door calls and alarm calls using
the ringtone.
Note:
Signalling is carried out by analogue devices as described (depending
on the end device used).
Some end devices (e.g., ISDN phones and wireless, analogue phones)
generate their own call tone/ringtone. For more information, refer to the
description of your end device.
On some system phones the ringtones can be configured based on the
call type or the phone numbers (optional, see phone manual).
Ringtones are displayed on analogue phones as follows:
1 x plus long
: 1 long tone (1 second), 4 second pause, ...
3 x plus court
: 3 double tones, approx. 1 second pause, ...
1. Tonalité spéciale
: Uninterrupted pulsing
2. Tonalité spéciale
: Continually repeating double tones (3 double tones in
5 seconds)
3. Tonalité spéciale
: 1 double tone, approx. 4 second pause, ...
4. Tonalité spéciale
: 2 short tones, approx. 4 second pause, ...
5. Tonalité spéciale
: 2 long tones, approx. 3 second pause, ...
6. Tonalité spéciale
: 1 short and 1 long tone, approx. 4 second pause, ...
Alarme
: Uninterrupted pulsing
