COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
239
Phoning
Outgoing Calls
When dialling phone numbers, the exchange line request type configured
for the subscriber must be noted. The PBX distinguishes three types of
exchange line requests:
Poste interne
: The user has to dial an external number with preceding
exchange line access number
.
Poste directement raccordé à la ligne principale
: For an external number
no prefix is required. However, the user has to dial an internal number with
preceding
**
.
Indicatif automatique
(factory setting): Neither for the internal nor for the
external number a prefix is required. The PBX automatically distinguishes
between internal and external numbers with the adjustment of the dialled
phone number and the internal numbering plan:
•
If the phone number is contained in the phone numbering list, the PBX
establishes an internal connection.
•
If the phone number is not contained in the phone numbering list the
PBX establishes an external connection.
Notes:
The behaviour of the phones COMfortel 1400 IP/2600 IP/3200/3500/
3600 IP when dialling phone numbers depends on the configured default
account (see manual of the phone). With the phones COMfortel 1400 IP/
2600 IP/3600 IP as of firmware 2.4 the default account can be
configured depending on the exchange line request type.
The short code number is a part of the internal numbering plan and is
therefore an internal number. However it leads to an external
connection.
To avoid conflicts between 3 or 4 digit phone numbers of the local area
network and the internal numbering plan, phone numbers of the local
area network should always be dialled with local area code. In countries
