242
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Phoning
Outgoing Calls
Requirements:
•
The CLIR (calling line identity restriction) service feature has been
enabled by the network operator.
1. Pick up the receiver.
2. Dial
*31#
.
3. Enter an external number. Possible entries:
External number
(for exchange line request type Internal phone: with
preceding exchange line access number)
Short code number
(for exchange line request type Direct exchange
line phone: with preceding **)
Once you have finished dialling the phone number, the subscriber will
be called.
The phone number display suppression has been enabled for this call.
Note:
You can also use this function on analogue phones, where it can be
performed via the T-Net function key/menu (optional, see manual for the
phone).
On some ISDN phones and system phones, this function can also be
called via an existing function key or via the menu (optional, see manual
for the phone).
If an emergency number is called while calling line identity restriction is
enabled, calling line identity restriction is disabled so that the emergency
service can identify the caller.
