428
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Réseaux publics
Connexions analogiques
Temps d’attente (3-30 secondes)
The waiting time for a line connection setting specifies the time (in seconds)
after which the PBX stops establishing the connection if it does not
recognise a dial tone, although the wait for dial tone setting is enabled.
If the wait for dial tone setting is disabled, the PBX starts dialling after
approximately 4 seconds.
Transmit line access code automatically (0-9, *, #)
The number/character string entered here is automatically added to
the selected phone number as a prefix.
This is needed if the public exchange always requires a specific leading
number/character string that is not part of the phone number.
Reconnaître et attendre automatiquement l’indicatif de ligne (0-9)
A dialling pause of 3 seconds is inserted automatically after the PBX
dials the number/character string entered here.
This is needed if the public exchange requires a pause after the specified
line access code is dialled.
Évaluation du courant de boucle
Requirements:
•
The loop current detection function to detect the network provider's line
connection
