756
COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
Settings – Périphériques
Alarmes
•
Created device (e. g. a door terminal) whose part the switch input is
(e. g. a still free door bell button)
A switch input that can be used to trigger the alarm, is assigned to the alarm.
In the list field, select one of the existing switch inputs and click
.
If you do not want to use any of the existing switch inputs, select
Nouvelle
entrée de signal
in the list field (
cancels the operation). Enter a freely
selectable name for the switch input and select the device as whose part the
switch input is to be created in the
Ajouter à
list field.
Enter a value under
Séquence DTMF
(for analogue door terminals) or
Invite SIP
(for VoIP door terminals). To detect that the alarm has been
triggered, e. g. because a door bell button has been pressed, the PBX
needs to know which DTMF sequence or which SIP invite the connected
device sends in this case (see manual and settings of the device in
question). The DTMF sequence or the SIP invite usually is the phone
number assigned to the door bell button within the door terminal.
Click
Ok
.
Note:
The switch input remains part of this other device (e. g. door
terminal) in the configuration of the PBX, but takes over the selected
alarm function for the alarm.
Deletes the switch input or opens the configuration of the switch input.
