COMpact 5200/5200R/5500R - Firmware V7.2 - Advanced Information V04 07/2018
715
Settings – Périphériques
Boîtes de messagerie vocale/télécopie
Enter a sender name that is to be inserted into the top line of a fax along with
the fax ID.
Enter the complete phone number of the own external connection as fax ID.
Number in the [country prefix][city code][external phone number]
(e. g. +495306920094).
Fax transmission
Correction d’erreurs ECM
Transmission errors occurring during the transmission (e. g. because
of faulty lines) will be corrected provided that EMC operation (Error
Correction Mode) has also been configured for the opposite end.
Note:
If transmission errors occur very often (e. g. overseas lines of
VoIP connections with frequent packet losses), the transmission cannot
be carried out since the fax machines involved will cancel the trans-
mission due to an excessive number of transmission repetitions. In such
cases, it may be sensible to disable EMC error correction. Without EMC
error correction, the transmission errors occurred will be displayed as
erroneous dots or lines.
9 600 baud maximum
The transmission rate of a fax will be adapted in such a way that a
faultless transmission quality will be reached, where possible.
Note:
The PBX supports a maximum transmission rate of 14400 baud.
This transmission rate may be too high for specific lines (e. g. overseas
lines or VoIP connections) and may lead to transmission interferences.
