9. Analogue TV
Press TV/AV on the remote control to switch to the Analogue TV mode.
Press MENU, use and to select and adjust.
/
/
Press MENU
once
BRIGHT
CONTRAST
COLOR
ENGLISH
AUTO-SEARCH
SEARCH
FINE
BAND
POSITION
SKIP
S-COLOR
S-SYS
SWAP
0~100
0~100
0~100
Other language options
48MHz ~ 860MHz
UHF / VHFL / VHFH
0 ~ 254
ON / OFF
AUTO / PAL /SECAM
DK/ I / L / BG
0
Press MENU
twice
Press MENU to exit.
1. Auto Search Start from Program NO .0.
2. When the signal is received under Manual Search, the indication
frequency will stop, which is the optimum position for signal storage.
If the signal is too weak, the system will automatically identify it as no
signal.
3. In the case of picture without any sound, please check the Sound System
for correct setup first.
4. If the input signal is not strong enough, please adjust the “Fine” option,
it may improve the picture and sound quality.
If the signal is too weak, the image will remain poor whatever you do, and
may output loud noises, shaky images and inferior sound etc., which is
not the TV's fault. If the image remains poor when using the telescopic
antenna, please try to use a roof top aerial or an amplified external antenna.
-21-
10. AV Input
Press TV/AV on the remote control to switch to AV In mode.
Press MENU, use
and
to select and adjust.
Other language options
Press MENU to exit Menu.
Press MENU
once
-22-
/
/
If there is no built-in battery in your product, please skip this page.
11. Battery Charging
1. The lithium battery is built into this machine.
Charge time: 5 hours.
Playback time: 1.5 hours
2. To charge, connect the supplied AC adaptor to the socket marked
“
DC IN+13.8V
”.
If the indicator becomes red, the battery is charging.
If the indicator becomes green, the battery has been fully charged.
3. To run the unit from the battery, remove the power supply from the
“
DC IN+13.8V
” and set the ON/OFF switch on the machine to ON.
4. Use only the supplied power adaptors with this device. Failure to do so can
cause damage to the device and risk personal injury.
DC IN+13.8V
Summary of Contents for DA110BD
Page 1: ......
