-13-
English
-12-
4. Select the type of network connection. Press <
OK
> to confirm or
change the settings for Wi-Fi network.
5. Use <
▲
> and <
▼
> to select between ‘Timezone’, ‘Date’ and ‘Time’,
press <
OK
> to enter.
5.1. Use <
▲
> and <
▼
> to change the timezone and press <
OK
> to
confirm.
5.2. Use <
▲
> and <
▼
> to change the date; Use <
◀
> and <
▶
> to
change between year, month and day. Use <
▶
> to highlight ‘Set’ then
press <
OK
> to confirm.
5.3. Use <
▲
> and <
▼
> to change the time; Use <
◀
> and <
▶
> to
change between hour, minute and AM / PM. Use <
▶
> to highlight
‘Set’ then press <
OK
> to confirm.
6. Select ‘DTV’ to finish the settings and start DTV; select ‘Finish’ to
go to the home page. Press <
OK
> to confirm.
Note:
Freesat Channels are pre-stored on the device and only
require the satellite dish to be correctly installed. If your dish is
oriented towards the Astra Satellite, you can select finish and go to
the DTV App to start watching TV without having to perform a scan.
7.2 DTV
The DVB600 can be used to watch, record and playback satellite TV.
To switch to DTV mode select ‘DTV’ from the home screen.
Back to Content