12
connection status icon on the MAIN screen of the Display Unit is lit blue.
Device Power Off
Detach the Thermometer Box from the Sensor Patch and the Power LED will go off.
Device Battery Replacement
The Thermometer Module is powered by a button cell. When the low battery alarm
appears on the MAIN screen of the Display Unit, the battery is exhausted and needs
replacement. Follow the instructions below to replace the battery.
Step 1:
Take off the battery cover by using a coin,
turning the cover clockwise, and remove the
battery.
Step 2:
Insert a new CR2025 battery into the battery
chamber and replace the cover. Align the mark
on the cover with the lock icon
.
NOTE:
Make sure the battery is installed before use.
NOTE:
The Thermometer Module remains paired with the system until the serial
number is deleted from the list.
NOTE:
The Thermometer Module must be placed within 32.8 feet (10 meters) to the
Display Unit
(for GA1000 Series)
, or to the Receiver/Transponder
(for GA2000 Series)
.
NOTE:
The Power LED blinks green when the power is ON.
Summary of Contents for GA-AP0011
Page 4: ...3 Guide to Symbols ...
Page 5: ...4 ...
