17
Assembly Instruction
OFV1
Use the handle to manually close and lock the window.
Unscrew handle.
Use screws
to attach adapter plate
on window.
Use existing boreholes of handle.
Fasten the adapter plate
with an additional suitable
screw
. Drill appropriate hole.
Insert the locking drive
OFV1
into groove of square
Vk7x55
and fasten it with two screws
and
spring rings
on the adapter plate
.
Secure fasteners against loosening; e.g. by applying
removable thread-locking compound such as “Loctite”.
Carefully clear away drilling swarfs to prevent
seals from being damaged.
Avoid surface scratches, for example by using
masking tape.
Remodel the adapter plate
so, that the
square Vk7x55
is in the upper part of the
adapter plate
.
The head of the square Vk7x55
must be
flush with the adapter plate
. It may not
protrude in any way.
Install square Vk7x55
and locking drive
OFV1
in
CLOSED
position.
LO
C
TI
TE
Plug the square Vk7x55
in the square opening
of the chamber gear (window fitting).
Pay attention to the correct slot position (
CLOSE
position).
If necessary shorten the square Vk7x55
.
a
ssembly
I
nstallatIon
step
7:
a
ssembLy
OFV1
21,5
92
43
06
Drill hole for square Vk7x55
are in the upper part of the
adapter plate
.
Square Vk7x55
may not protrude in any
way.
Square opening of
the window fitting
Note the position of groove
(
CLOSE
position)
M5x40
M5x16 or
Spax countersunk 4,5x30
1
6
5
4
1
2
3
4
1
2
oFV1
FL
FL
FL