6
Assembly Instruction
OFV1
s
afety
instruCtions
01
01
Danger spots by crush and shear points
Side-hung
Bottom-hung
Roof windows / skyskylight domes
Louvre windows
Danger spots: crush and shear points according to DIN EN 60335-2-103
n
Ote
n
Ote
!
w
arning
!
w
arning
!
All devices must be permanently protected
from dirt and moisture, if the drive is not
explicitly suitable for use in wet areas (see
technical data).
Area of application
The drive shall only be used according to its intended use.
For additional applications consult the manufacturer or his
authorized dealer.
Mounting material
The required mounting material must to fit with the drive
and occurring load and, if necessary, supplemented.
Installation
These instructions address expert and safety-conscious
electricians and / or qualified personnel knowledgeable in
electrical and mechanical drive installation.
Always check whether the system complies with current
legal regulations. Special attention must be paid to the
opening width, the opening area, the opening time and the
opening speed of the window, the temperature range of
the drives / external devices and cables as well as the cross
section of the connecting cables as function of the cable
length and power consumption.
All specifications for installation must be checked indepen-
dently and, if necessary, adjusted at the installation-site.
The connection assignment, the electrical supply data (see
machine plate) and performance limits (see technical data)
as well as the mounting and installation instructions of the
drive must be strictly observed and adhered to!
Do not reach into the window rabbet or the operating
element (chain or spindle) during installation and opera-
tion! Ensure that, based on the installation position and
the opening movement of the casement, persons cannot
be trapped between the driven part of the window and
surrounding fixed components (e.g. wall).
s
aFety
instructiOns
It is important to follow these instruc-
tions for the safety of persons. These
instructions shall be kept in a safe place
for the entire service life of the products.
Risk of crushing and entrapment!
Window can close automatically!
The integrated load cut-off stops the
opening-drive during closing and opening
when the drive is overloaded.
The compressive force is absolutely
sufficient to crush fingers in case of
carelessness.
Do not misuse the drive for other
applications! Do not allow children to
play with this drive or its regulating
and / or control units, including the
remote control!
The safe operation, avoidance of injury to
persons and damage to property, as well
as risks, is only guaranteed by proper
installation and setting according to
these installation instructions.
Before installing the drive, check whether
the casement is in good mechanical con-
dition, the weight in balance and whether
it opens and closes easily!
Never connect 24 V DC drives to 230 V AC
mains voltage!
Danger to life!
