auna multimedia 10012071, Manual

10

Features

•  90W x 2 Channel/ 90W x 4 Channel/ 90W x 6 Channel

•  Multi-mode connection capability for Simultaneous subwoofer & satellite speaker operation

•  Adjustable subwoofer crossover frequency(3O—25OHz)

•  High current discrete output devices

•  Adjustable RCA level inputs

•  Input ground isolation noise rejection circuit

Power Supply Section

•  Ultra stable PWM (Pulse width modulated)

•  Power supply (11~16V)

•  Thermal Protection circuit

•  Remote on power switching

General

•  Transient noise muting

•  Turn on delay

•  Speaker short circuit protection

•  Gold plate RCA input and terminals

•  Chassis mount ATC fuse protectionGeräuschreduzierung

1. Connection of Power Cord

• 

Since this unit deals with a high power, large current will flow and the wiring or power cord is high 

importance.

•  Connect the red wire directly to the (+) terminal of the battery using the cord with a fuse holder sup-

plied.

•  Connect the black wire tightly to an appropriate screw on the metal part of car after removing paint 

for proper grounding. Be sure to use the screw not bring danger for driving.

•  Proper connection will provide clear sound.

2. Connection of Remote On/Of Wire

•  Connect the orange wire to a switched power cord of the car stereo to be connected to this unit will 

control the unit power on/off with the car stereo’ s

Dear Customer,

Congratulations on purchasing this equipment. Please read this manual carefully and take care of the 

following hints on installation and use to avoid technical damages. Any failure caused by ignoring the 

items and cautions mentioned in the operation and installation instructions are not covered by our 

warranty and any liability.