auna multimedia 10026465, Manual

Getting Started

Connecting mains power

•  Connect the attached mains plug to a mains power supply outlet.

•  Switch the power outlet ON.

Standby mode

•  Press the STANDBY button (U2 Unit & R3 Remote). to wake the unit from STANDBY mode. 

•  To enter STANDBY mode press either STANDBY buttons (U2 Unit & R3 Remote).

•  NOTE: As part of the power saving mode the unit will enter STANDBY mode automatically after 10 

minutes (approx) of no audio output.

General Operation

Playing audio from a connected TV or other devices

•  After connecting a TV or other device to the Sound bar, follow 

the below steps.

•  Ensure the Sound bar is powered ON. If not press the STANDBY 

button (U2) or remote (R3).

•  Press the SOURCE button (U3,R2) repeatedly to choose the cor-

rect source to play. The source icon will appear on the display.

•  Adjust the output volume using the /- buttons (U6 

Unit or R5 Remote).

Digital Audio Connections

Please note when connecting the soundbar using DIGITAL cables (COAXIAL or OPTICAL), the AUDIO 

SOURCE MUST be set to output PCM digital audio.

Adjusting the Sound

Volume controls

•  To increase the volume level press the  button (U6 Unit or R5 Remote) repeatedly or 

press and hold for fast adjustment.

•  To decrease the volume level press the VOLUME - button (U6 Unit or R5 Remote) repeatedly or 

press and hold for fast adjustment.

Sound mode presets

•  During playback pressing the SOUND MODE button on the re-

mote control (R11) repeatedly cycles through the available 

sound modes. Choose between :- STANDARD, MOVIE, MUSIC 

or NEWS.

•  As you select a sound mode, the corresponding name appears 

on the display to indicate  that sound mode is active.

• 

NOTE

: The STANDARD sound mode when selected does not 

show an icon on the display.

18

18