EN
19
Use with Lower Anchors and Recline Feature
The booster has a recline feature to best
fit your vehicle and provide maximum
comfort to your child.
1 Place vehicle seat back in normal
upright position.
2 Connect booster to vehicle Lower
Anchors (see Use of Lower Anchors).
Ensure bottom of booster is in full
contact with vehicle seat.
(22)-1
3 Adjust the seat bottom by holding the
Recline Lever and moving the seat
in or out to obtain desired recline as
shown in
(22)-1
.
4 Ensure the back of the booster is in
contact with vehicle seat as shown in
(22)-2
.
5 Adjust or remove vehicle headrest as
needed to remove interference.
If you remove your vehicle headrest,
be sure to stow it in a secure place;
check your vehicle owner’s manual.
Warning! Never use booster when
reclined beyond the recline
position 2.
(23)
21
22
1
1
2
23
1
2
