9
the appliance.
•
Do not use the appliance for other than intended use. This appliance has been designed solely for
domestic use; the manufacturer‘s liability shall not be engaged in the event of any professional use, by
any misuse or by any use not complying with the operating instructions.
•
Never clean the surface of the device with solvents, paint thinners, cleansers or other chemical prod-
ucts. Instead, use a soft, dry cloth or soft brush.
•
Save these instructions.
Connection and Initial Use
•
Shut off all devices that ought to be connected. To be sure, take out the proper fuse.
•
Make sure that the subwoofer is OFF and turn down the GAIN control. Set the FREQ control to about
center position.
•
Connect the mains cable with a socket.
•
Connect the subwoofer to an amplifier as shown in the connection diagrams below. For amplifiers with
one subwoofer-output it makes no difference whether you use the right or left input of the subwoofer.
•
Switch your amplifier and subwoofer on (switch: OFF - AUTO - ON).
•
Play some music.
•
Turn the GAIN control slowly until you reach the desired level.
•
Set the FREQ control to achieve your desired tone.
•
Vary the position of the PHASE (phase reversal switch). Choose the position that offers the tightest
bass foundation for the combination with your other speakers
•
You can slide the power switch to the position AUTO. This will make the subwoofer wake up anytime
you start any music playback.
