34
EN
will appear on LCD display. Moreover, it will indicate program no. and
digits for track no. to be programmed.
3. Select a desired track by pressing skip
or
buttons.
4. Press the “ Program ” button to store the track into memory.
5. Repeat steps 3 and 4 to enter additional tracks into the memory if
necessary.
6. When all the desired tracks have been
programmed, press CD “ Play/Pause ” button to
play the disc in assigned order.
7.
To cancel the programmed file, press “Stop”
button twice until “ MEM “ indicator is
disappear on LCD display.
Playback of MP3 song via USB storage media or memory card
Connecting
The system is able to decode and playback all MP3 file which stored in the
memory media with USB connecting port.
8.
Press the Power on/off / Function button (13) to turn on the unit and
press the button again to switch the function to USB mode.
9. Plug-in the USB plug with the face up & make sure it going into
completely. Insert straight without bending.
Connecting the USB upside down or backwards could damage the
audio system or the storage media. Check to be sure the direction is
correct before connection.
10. The system will start reading the storage media automatically after
connecting, and LCD display will show the track no. and the playback
time.
11. Repeat the same playback procedure as playing CD/MP3 disc as
above.
Remark
•
The system can detect and read the file under MP3 format only though
the USB socket.
• If connect the system to MP3 player via the USB socket, due to
variances in MP3 encoding format, some MP3 player may not be able to
play via the USB socket. This is not a malfunction of the system.
• USB port does not support connection with USB extension cable and is
not designed for communication with computer directly.