38
EN
DAB Radio
If the system is switched on for the first time, it will automatically enter into
the DAB mode and perform auto scan function. During the scan the display
will show “Scanning …” together with a slide bar that indicates the progress
of the scan and the amount of stations that have been found so far. Once
the scan has finished, the radio will select the first alphanumerically found
station. You can now press the
or
button to explore the found stations
followed by pressing the
button to select listening to the station.
DAB Full Scan
The full scan will search for the entire DAB Band III channels. After the scan
has finished, the first alphanumerically found station will be automatically
selected.
1. To activate full scan, press and hold the Info/Menu button to enter into
the Menu, repeatedly press the
or
button followed by pressing the
button to select and confirm “Full scan”, the display will show “Scanning …”
and a progressing slide bar.
2. All the stations that have been found will be stored automatically, to
explore the stations that have been found, press the
or
button and
when you find a station that you would like to listen to, press the
button.
DAB Manual Tune
1. To activate manual tune, press and hold the Info/Menu button to enter
into the Menu, then press the
or
button followed by pressing the
button to select and confirm “Manual tune”.
2.
The display will show “5A” to “13F” and their associated frequencies,
press the
or
button to move through the DAB channels, when your
desired frequency appears in the display, press the
button to confirm.
The name of the station group (ensemble/multiplex) will be displayed.
3. To listen to the station selected, press the
button again.
DAB Secondary Services
On some occasions you will see a “>” symbol directly after the name of the
station, this indicates that there are secondary services available to that
station. These secondary services contain extra services that relate to the
primary station. E.g. a sports station may want to add extra commentaries.
The secondary services are inserted directly after the primary station. To
select the secondary station, press on the
button once.
DRC
DRC stands for Dynamic Range Control. The dynamic range for each radio
programme is set by the broadcaster for each radio station and may be
different for the types of programme broadcast, such as pop or classical
music or a chat show. The dynamic range control signal is transmitted in
Summary of Contents for Oakland DAB
