34
EN
RECORD PLAYER
Check that your Retro Turntable is in PH/Turntable mode. If you are not
already in PH mode, repeatedly short press the Source button until you are
in PH mode (check the display). PH will be displayed.
Auto Stop On/Off
Under the dust cover and to the right of the tone arm, there is an OFF/ON
slide switch. This is for the turnable auto stop feature.
If you would prefer the turntable to only turn when the tone arm is moved
over the record and to stop when the record stops, then set this switch to
ON. If you would prefer for the turntable to turn as soon as you select PH/
Turntable mode and to continue turning even when the record you are
playing comes to an end, you change to another mode or switch the Retro
Turntable product to Standby mode, then set this switch to OFF.
Changing the Turntable speed (RPM))
Before you play a record, you need to check the correct speed or RPM that
the record should be played at. Your Retro Turntable has 3 RPM speeds, 33,
45 and 78 RPM.
The RPM selector switch is under the dust cover and to the right of the tone
arm.
Playing a record
1. Lift the dust cover.
2. Check if the record you intend to play will need the spindle adapter and
place this over the spindle, if necessary.
3. Place your record onto the turntable felt mat.
4. Check that you have removed the protective cover from the stylus and
unclipped the tone arm.
