19
Remarks:
•
The recording speed is 1:1 and according to the actual plying time of the playing source
•
To suspend the recording process, press the “ play/pause ” button (17), “ busy “ briefly appear on
lcd and the recroding is in pause. To re-start, press again the “ play/pause ” button (17) until the
play indicator “ “ show on lcd display (2).
Recording settings
•
Recording level
The preset recording level of the system is lower than original music source in order to avoid distortion
during recrodingly except aux-in recroding mode.
•
Track separation
You can divide the recording music track by track during recroding: anytime when press the ts button
(26) once during recording at any mode, the system will generate a new track and continuous the
recroding. The word “busy“ will briefly show on lcd display (2), it mean the unit is creating a new track
successfully.
•
Finalize a cd-r(w) disc
You must convert the cd-r(w) disc into standard cd before playing at other audio cd player. This process
is knows as finalizing and a table of contents (toc) will writeen to the cd on the same time:-
•
Select cd function mode and place the cd-r(w) disc you are going to finalize.
•
Press the finalize button (27) during cd stop mode. “ Fin-d “ appears on the lcd display (2). (Press
the “ cd stop ” button to quite finalize mode if necessary)
•
Press the “ play/pause ” button (17) to start finalizing and the lcd (2) will show “ busy “
d u
-
ring the process.
•
After completion, the cd door will open automatically and the “ no toc “ indicator will disappear
from lcd (2).
Remarks:
•
The time for finalizing is subject to the contents of recorded and it may take up to 15 minutes
in some cases.
•
No button is working during finalize process.
•
Never turn off the power or un-plug the power cord durign finalize process.
•
The cd-r disc cannot be recroded again after finalizing
•
Although finalized cd-r disc may be played on ordinary cd players, remember that finalized
cd-rw disc may not play on ordinary cd players.
•
Erase or unfinalize a cd-rw disc
It is possible to erase the last recroded track or earse a whole record disc. If erase the last track of the
finalized cd-rw, must unfinalized the cd-rw first
A) unfinalize a cr-rw disc
•
Set at cd function mode and place the cd-rw disc you would like to unfinalize.
