12
www.auna.de
Operation
USB operation
1. Press USB ON/OFF button to set the unit to the USB mode, USB indicator light will be on.
2.
Insert the U disk, the unit will begin to play the first song of the U diskautomatically. And the indica
-
tor light will flash.
3. Press the Forward skip button
or the Backward skip button
to select the song.
4.
To pause playback, press Play/Pause button
the indicator light will be on; press Play/Pause
button
again to resume playback.
5.
ATo stop playback, press USB ON/OFF button, the indicator light will go off.
Note: When playing USB (the USB indicator light is on), only the Volume control knob on
the front panel can be used.
Tuntable operation
1.
Rotate the ON/OFF knob to turn on the unit.
2.
Rotate the SPEED CONTROL KNOB to the correct speed (33 ½, 45 oder 78 rpm) for the select
record.
3.
Take out the MAGNETIC ADAPTER, put a record on the TURNTABLE lightly, then put the MAGNETIC
ADAPTER back to fix the record.
4.
Remove the stylus protector from the stylus assembly.
5.
Release the tonearm lock, use the Cue Lever to lift up the tonearm.
6.
Move the tonearm over the record where play is desired to begin. Use the Cue Lever back to the
down position, the tonearm will descend slowly onto the record and begin to play.
7.
Rotate the volume control knob to get desired sound level.
8.
At the end of the record, the tone arm will stop automatically.
Line-out operation
This system includes a set of LINE OUT jacks which allow you to record from the Radio or Phonograph
of this system to an external recording device such as a cassette recorder, Mini-Disc, etc. ln any play
mode, insert the audio cable(not include) into the matching “ LINE OUT” socket of the unit, operate as
usual, and through the speakers of A, we can hear the sound exported from.Note: Power saving function
To help save power consumption, if there is no audio signal input for 20 minutes while
the unit is powered on, the unit will off power automatiically. To turn power back on and
resume playing. you will need to turn off the power first and turn it back on to continue.
