Assemby Instructions for APT4300 – Aunger 4’x 3’ Trailer
2
Warning – Avoid accidents
Keep children and pets away from the work area.
Maintain an orderly work area. Avoid laying cables, wires etc. on the floor.
Use personal safety equipment when using tools.
It is highly recommended that when assembling this trailer that two persons undertake
the task as some heavy lifting is required
No Tools are required for assembly
The following tools are included with this kit
1) 8-10 mm spanner
2) 10-12 mm spanner
3) 13-16 mm spanner
4) 14-17 mm spanner
5) 21mm socket wrench
Should you wish to use your own tools, feel free to substitute any tool, these are provided
for your convenience.
Note: A locking solution can be used on bolts for permanent assembly of the trailer,
however it is not essential.
Lay out all components, as per the diagram on the following page, prior to beginning
assembly to ensure all required parts are present and to assist with easy part
identification.
If there are components missing, DO NOT ASSEMBLE THE TRAILER, contact Aunger on
(07) 3260 2400 for replacement parts. DO NOT substitute any component as this will void
warranty and may affect ADR compliance.
If you have any problems with assembling the trailer, please contact Aunger on
(07) 3260 2400 for technical assistance
If you would like to enquire about having your trailer assembled for you,
please contact
Future Logistics on 1300 307 712
.
Please Note: Future Logistics is an assembly agent only and any technical
assistance or sales enquiries should be directed to Aunger.
