5. Breakdowns
While an electrical fault may be a nuisance, it
is not dangerous. The motors are fitted with all
necessary safety provisions and have double
insulation.
5.1 Electrical malfunctions
Check that:
- the plug is in the socket;
- the current is switched on at the mains.
5.2 Mechanical malfunctions
Undesirable noises (bed squeaks and
creaks)
Unwanted noises are usually caused by
moving parts touching each other.
The reason for this may be a missing part, or
parts that have not been tightened up properly
or have become loose when the bed was
moved.
Check that:
- the bed is properly horizontal;
- the bed is positioned away from the wall;
- there are no unwanted objects in the bed that
should not be there (spoons, forks, pens,
etc.).
6. Cleaning and maintenance
Remove stains on the mesh base with a damp
cloth and gentle cleaning agent. Never use a
scouring sponge or scouring agents.
Dust the mesh base and leg frame
occasionally.
As part of Auping’s commitment to caring for
the environment all metal parts have a powder
lacquer coating instead of a wet-lacquered
surface. Some of this coating material can
drop off underneath the bed during the first
weeks of use. This is harmless and can easily
be removed.
GB18
_02QZ1_3815 AVS455_466 bw.pdf - pag.18
October 6, 2008
LET OP !!! Lage resolutie!