Example 3
The
PROG
button pressed 9 times returns the
operation to the first program for working days.
In order to avoid a mistake observe the indicators
‘2’ and ‘4’ according to the display description in the
point 5.2. The programming is completed by
pressing
RETURN
or waiting 10 seconds without
pressing any key.
B)
It is possible to program all 8 temperatures to the
same value, e.g. 21ºC. In such a case the equal
temperature is maintained the whole week through,
irrespective of the hours of theoretical switching
between the temperatures (no need to change the
switching time while programming).
C)
Programming sequence described in the point 7.3
may be changed, i.e. the temperature may be
programmed at first and, afterwards, the time.
D)
Programming of some or all four programs for 5
working days, or for Saturday or Sunday, is also
possible with the same hours and different
temperatures. In such a case the controller shall
maintain the temperature corresponding to a
program of lower number.
NOTE
: The Program 2 of Sunday lasts until 6:00
a.m. on Monday. The Program 4 of Friday lasts until
6:00 a.m. on Saturday (this is valid for factory
settings made prior to the changes imposed by the
User).
AURATON 2020, AURATON 2020 TX Plus
- Setting the controller
42
EN
