2. Set the temperature to be maintained during
our absence, e.g. 17ºC, using the appropriate
buttons.
3. Pressing the buttons
DAY HOUR MIN
(in the
intervals shorter than 10 seconds) adjust the
day and time of restoring the automatic
(programmed) operation. In this example it
could be Sunday, 2:00 p.m.
It means that the controller should resume its
automatic operation 6 hours prior to our
planned arrival and temperature of the rooms
should grow accordingly.
Note
1. The automatic operation may be resumed
anytime by pressing
AUTO
.
2. The required time advance of restoring the
automatic operation strongly depends on
specific properties of the object, its insulation,
the type of heating and previous reduction of
the temperature. The time advance should be
selected experimentally.
7. Antifreeze mode
This operation mode results in maintaining the room
temperature amounting to 5ºC.
1
. Move the battery cover to the right.
2
. Move the slider to 5ºC.
This function switched on introduces no changes in
program settings, it only deactivates them. Once
the buttons
AUTO MAN PROG
are pressed
an
OFF
indication appears at the display, giving
evidence of deactivation of these functions.
Automatic operation may be restored any time by
changing the slider to
HEAT
.
AURATON 2020, AURATON 2020 TX Plus
- Antifreeze mode
44
EN