26/10/21, 3:26 μ.μ.
AURATON Cetus - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-cetus-pl/
16/27
2. By turning the knob to the left or
right, we set the temperature
reduction by a value from 1 ° C to 5
° C. Confirm the selection with the
button
(
.
3. The hour field on the display changes to edit mode and starts blinking. Using the
knob again, we set the number of hours for which the reduced temperature
programmed by us is to apply. You can choose from 1 to 12 hours. Confirm your
selection by pressing
(
.
4. For the selected number of hours, AURATON Cetus will be in the "temporary
temperature reduction" mode and will start it every day at the same time.
NOTE:
After the set hourly time, AURATON Cetus will return to the basic temperature
setting. Instead of the moon (
T
), the sun (
S
)will appear on the screen
NOTE:
The temporary temperature reduction mode always starts at the moment of
confirming the edition of the function. This means that any temporary temperature
reduction should be programmed at a time when we want such a change to take
place.
A daily, wired temperature controller
Description of AURATON Cetus
The first launch of AURATON Cetus
"Manual" mode setting
FrostGuard function
Hysteresis change
PWM operating mode
Remarks
Connection diagram of AURATON Cetus
Cleaning and maintenance
Technical data
Disposal of the device
To download
