26/10/21, 4:32 μ.μ.
AURATON Libra SET - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-libra-set-pl/
11/50
NOTE:
After replacing the battery and assembling the housing, we recommend pressing the
OK button twice to stabilize the relay operation.
Mount AURATON Libra R - weekly, wireless
temperature controller
To fix AURATON Libra R to the wall:
1. Remove the cover
(as shown in the "Battery Replacement" section)
2. Drill two holes 6 mm in diameter in the wall
(mark the spacing between the holes
using the rear part of the AURATON Libra R housing).
3. Put the wall plugs in the drilled holes.
4. Screw the rear part of the AURATON Libra R housing to the wall using the screws
included in the kit.
5. Put the cover on.
NOTE:
In the case of a wooden wall, there is no need to use expansion bolts. It is enough
to drill holes with a diameter of 2.7 mm (instead of 6 mm) and screw the screws
directly into the wood.
Introduction to programming
programming
Manual control
Anti-freeze temperature
Description of AURATON Fornax
Pairing AURATON Libra R of a weekly, wireless
temperature controller (transmitter) with AURATON
Fornax - a wireless controller for a heating or air-
conditioning device (receiver)
RESET AURATON Libra R
MASTER RESET AURATON Libra R
Configuration settings
PWM operating mode
Special situations
Unique features of AURATON Fornax
Additional remarks
Connection diagram of AURATON Fornax
Cleaning and maintenance
Technical data
Disposal of the device
To download
Weekly, wireless temperature controller with
AURATON Fornax heating or air conditioning
controller (set)
The description of AURATON Libra R
The first launch of AURATON Libra R.
