26/10/21, 3:38 μ.μ.
AURATON Tucana - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-tucana-pl/
30/39
Illumination color change
Flashing backlight means that you can
change the color of the backlight with
the
bc
buttons . Confirm your choice
by pressing
and
. AURATON
Tucana will proceed to change the next
parameter.
Hysteresis change
The hysteresis is to prevent too
frequent switching on of the actuator
due to small temperature fluctuations.
For example, for the HI 2 hysteresis,
when the temperature is set to 20 ° C,
switching on will take place at 19.8 ° C,
and switching off at 20.2 ° C. For the
HI 4 hysteresis, when the temperature
is set to 20 ° C, switching on will take
place at 19.6 ° C, and switching off at
20.4 ° C.
Configuration settings
PWM operating mode
Connection diagram of AURATON Tucana
Cleaning and maintenance
Technical data
Disposal of the device
To download
Weekly, wired temperature controller
Description of AURATON Tucana
First launch of AURATON Tucana
Introduction to programming
programming
Manual control
Vacation mode
Setting the anti-freeze temperature program
Heating device operation time counter
Temporary switch off of the relay
RESET AURATON Tucana
MASTER RESET AURATON Tucana
Configuration settings