26/10/21, 3:38 μ.μ.
AURATON Tucana - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-tucana-pl/
32/39
Confirm your selection by pressing
and
. AURATON Tucana returns
to the normal operating mode.
Offset change
Offset allows for calibrating temperature indications with a tolerance of ± 3 ° C. For
example, AURATON Tucana indicates that the room is 23 ° C, and a normal room
thermometer next to it indicates 24 ° C. By changing the offset by +1 degree, we will
make AURATON Tucana show the same temperatures as the room thermometer.
The offset change mode is signaled by
the flashing word OFFS. Use the
bc
buttons to set the required value in the
range from -3.0 to 3.0 (factory setting -
0.0). Confirm your choice by pressing
and
. AURATON Tucana returns
to the normal operating mode.
NOTE:
If no button is pressed for 10 seconds while changing the configuration
settings, AURATON Tucana will return to the normal operating mode.
Configuration settings
PWM operating mode
Connection diagram of AURATON Tucana
Cleaning and maintenance
Technical data
Disposal of the device
To download
Weekly, wired temperature controller
Description of AURATON Tucana
First launch of AURATON Tucana
Introduction to programming
programming
Manual control
Vacation mode
Setting the anti-freeze temperature program
Heating device operation time counter
Temporary switch off of the relay
RESET AURATON Tucana
MASTER RESET AURATON Tucana
Configuration settings
