26/10/21, 3:38 μ.μ.
AURATON Tucana - AURATON manuals
https://manuals.auraton.pl/manuals/auraton-tucana-pl/
34/39
NOTE:
If no button is pressed for 10 seconds while changing the configuration
settings, AURATON Tucana will return to the normal operating mode.
PWM operating mode
(Pulse-Width Modulation)
By changing the hysteresis settings (chapter "Configuration settings), we can turn on
the PWM operating mode. In this mode, AURATON Tucana cyclically turns on the
heating device in order to minimize temperature fluctuations. AURATON Tucana checks
the temperature rise times and the temperature drop times.
Knowing these values, AURATON Tucana turns on and off the heating device in such
cycles to keep the temperature as close as possible to the set value.
1. Temperature
2. Time
3. Set temperature
4. Room temperature
Configuration settings
PWM operating mode
Connection diagram of AURATON Tucana
Cleaning and maintenance
Technical data
Disposal of the device
To download
Weekly, wired temperature controller
Description of AURATON Tucana
First launch of AURATON Tucana
Introduction to programming
programming
Manual control
Vacation mode
Setting the anti-freeze temperature program
Heating device operation time counter
Temporary switch off of the relay
RESET AURATON Tucana
MASTER RESET AURATON Tucana
Configuration settings