auray BA-XE4, Owner'S Manual

Owner’s Manual

Owner’s Manual

5

BA-XE4

Mounting the Arm with the Tabletop Flange Mount

The tabletop flange mount is for 

permanent installation onto surfaces 

like production tables, podiums, 

and broadcast workstations.

1.  Place the flange mount on 

a secure, flat surface like 

a tabletop or desktop.

2.  Secure it to the surface with three screws.

3.  Loosen the mounting socket’s locking knob, and 

slide the arm’s base stud into the flange’s socket.

4.  Position the arm as desired, and tighten the locking 

knob to secure the arm’s position. Loosen the locking 

knob to swivel the arm or remove it from the mount.

Adjusting the Microphone Angle

1.  Loosen the microphone 

locking knob, and adjust the 

angle of the microphone.

2.  Tighten the microphone 

locking knob.

Adjusting the Tension on the Broadcast Arm

The broadcast arm supports a microphone and shock mount 

assembly that weighs up to 3.5 lb. To increase the arm’s 

tension, tighten the tension knob until the microphone is 

securely held in place.

Connecting the Microphone

Once the microphone and shock mount are attached to the 

broadcast arm, plug the arm’s integrated male XLR connector 

into the microphone’s female XLR jack.