Owner’s Manual
SMS-10CL
Operating Instructions
Mounting Monitors
Important!
Always support the
monitor plate with one hand
when you loosen the tilt lock to
make an adjustment.
1. Mount the monitor on the
monitor plate in horizontal or
vertical orientation.
3
2. Loosen the tilt lock and
adjust the monitor’s angle.
Make sure the mounting
plate’s lip is on the lower side
of plate’s angle to prevent
slipping.
4
3
Adjusting the Height
1. Loosen the locking knob.
2. Raise or lower the monitor
plate, and insert the locking
pin through the holes.
1
3. Lower the shaft until it rests
on the locking pin. Tighten the
locking knob until secure.
2
1
2
4
